3-2-1 Standard
Rated 3.5/5 based on 11 customer reviews

3-2-1 Standard

Available: In Stock
£9.51
Image

    A clear, odourless, flame-retardant liquid, ideal for preventing rapid spread of flame on a range of upholstery, paper-based materials and soft furnishings.

    For use on many absorbent materials including canvas, cardboard, clothing, curtains, carpets, dust sheets, polyurethane furniture, polystyrene, tents, upholstery, wallpaper, and even some nylon materials- Great during the festive period can be used to protect both synthetic and living Christmas trees which are at high risk of fire due to heat from lights
    Items treated with 3-2-1 can be dry cleaned as usual without impacting its effectiveness. Our 3-2-1 can be used to fireproof Christmas trees, but the trunk must be placed into sand or soil and fed with water.

    First, spray a small sample of the material to ensure it is colour fast.

    FURNITURE: Spray all the areas, which have foam underneath the material, so the material is
    absorbing the 321 liquid.
    Place the chair or settee on its back & spray all the underside material.
    Place the furniture upright, spray the back, sides & front of the furniture, ensuring that the
    material is wet with 321 liquid.
    Should the seat cushions be removable, spray all material under seat cushions, ensuring that
    you get 321 down the gaps.
    Should the seat cushions have a zip fastener, then unzip & spray 321 over the internal sponge
    material & all over the outer material, ensuring by pressing in with fingers, so that the sponge /
    polyurethane absorbs the 321.
    Re-spray areas such as the backs & arms of chairs, which have sponge foam underneath the
    material, & using fingers, pad or cloth, press the 321 through the material into the sponge.
    This procedure should also be carried out on the cushions that cannot be unzipped. Ensure
    that these sponge areas are well soaked. (Note ? If the material is 60% polyester, do ensure
    that the foam areas are very well soaked). See below for leather & rexine covered furniture.

    CURTAINS: If it is a single material & not lined curtains, spray while hanging, until the material
    is moist. Spraying only needs to be carried out on one side. For lined curtains, then both
    sides of the curtain must be sprayed. Apply to both sides equally for lined curtains.

    CARPETS: Carpets can be sprayed while laid, if foam backed, then with a cloth or pad press
    into the carpet as you spray, to ensure that the 321 is absorbed into the backing.

    BEDDING, MATTRESSES: If it is possible, take off the cover of the mattress, then spray into
    the foam; pressing 321 into the foam material with a cloth pad, ensuring that the foam absorbs
    all the 321 thoroughly, then spray the cover until it is completely wet. Should the cover not be
    removable, the spray over the cover, pressing the 321 into the foam until you feel it is totally
    absorbed.

    SHEETS, BLANKETS, COVERS, ETC: These can be sprayed with 321/W & washed
    approximately five times, then re-treat by either re-spraying or dipping into the 321. Wring out
    into a bowl & replace residue into the bottle for when re-treatment is necessary.

    LEATHER & REXINE FURNITURE: With this type of covered furniture, the only way to treat
    the foam is to tip the chair on its back, take off the underneath material & spray 321 up inside
    the foam. With your fingers, ensure that the 321 is getting thoroughly absorbed into the foam.
    For added safety in your kitchen, soak a tea towel in 321 & leave it near the cooking area, so
    that if you have a pan fire, the tea towel can be placed over to help put out the fire.
    Guide to the amount of 321 required for curtains, bed covering, etc., 6-10 m? per litre. Foam
    filled furniture, approximately 5-7 m? per litre, according to the amount...

    Technical Data Sheets

    TD066-09-2015

    Application Data Sheets

    AP066-09-2015

    COSHH Data Sheets

    HS066-09-2015

    Combined Data Sheets

    IS066P-01-2014
    IS066F-04-2009

    All of our 'in stock' product orders will be shipped same day, as long as the order has been processed before 3pm - this is simply to be in a position to catch the courier pickups.

    Some of couriers are explicit in their non-liquid deliveries so if you have ordered a mixture of ambient and liquid products your order has to be split across two couriers. These are lead by courier company policies, however the courier selection was done of price and so you can be safe in the knowledge that you will be getting the most competitive delivery prices around. 

    We deliver across the Island of Ireland and aim for 48/72hrs deliveries on all our orders. If you order a product that is 'out of stock' we will get them shipped by our supplier, Envirograf UK over night for our next days deliveries.