Fire Resistant Coating For Lath and Plaster Ceilings
Rated 3.5/5 based on 11 customer reviews

Fire Resistant Coating For Lath and Plaster Ceilings

Available: In Stock
€21,89
Image
?
    ?

      A white, fire-resistant coating system, offering fire protection to plasterboard or lath-and-plaster ceilings and walls of various thicknesses. Provides an excellent solution for projects where plasterboard features are in need of fire rating but cannot be replaced, as is often the case in listed buildings. When attacked by fire, the intumescent material protects the integrity and insulation of the coated surface.

       

       

      – Designed for application to 9mm or 12½mm thick plasterboard, 18mm & thicker lath-and-plaster, providing 1 hour of integrity and insulation

      – Dries to a smooth or stippled decorative finish

      – An ideal solution for upgrading the fire rating of original features in Graded historical buildings

      Clean all walls or ceilings, taking off any loose paint and removing all wall or ceiling paper. Any grooves or cracks in the ceiling or walls can be made good with Envirograf® Intumescent Cement – Product 63 or AM Intumescent Mastic – Product 58. Should it be found that EP/CP will not adhere to the existing coating, then either apply a PVA Adhesive Coating at a 50/50 ratio of adhesive to water, or apply 1 coat of Envirograf® HWAP Adhesion Primer at 14 m² per litre. Then apply 2 coats of EP/CP at the rate of 8 m² per litre, per coat. The approximate drying time is 1 hour. EP/CP is a smooth coating, but if you require a comb finish or a stippled look, then apply 1 coat of EP/CP at 8 m² per litre, followed by 1 coat of AB – Product 96 – this is a thicker version of EP/CP, which can be comb finished. EP/CP and AB both need a Top Finish Coat. This can be any make of external Smooth Acrylic Emulsion or Envirograf® HW/AEC Acrylic Coating at 10 m² per litre, per coat. This can be coloured and is available in matt or satin.

       

       

      OTHER TOP COATS
      HW04/UC white spirit based Undercoat at 10 m² per litre.
      HW04/TC white spirit based Top Coat at 10 m² per litre. Available in matt, satin or gloss.
      EP/CP and all the Top Coats can be coloured.
      EP/CP can be painted onto all cornices or plaster mouldings with the same Top Coats applied.

      Where cornices have gold leaf on them, a clear coating HW02/E can be applied – 3 coats at 8 m² per litre, per coat. For the Top Coat, apply 1 coat of BL/TCW water based clear Top Coat at 8-10 m² per litre.








      EP/CP Primer

      A water-based primer for use where there is distemper, dirt, dust etc. prior to applying intumescent coating.

      Ref                     Volume

      EP/CP/P/1         1 litre

      EP/CP/P/2.5      2.5 litres

      EP/CP/P/5         5 litres


      EP/CP Intumescent coating

      A water-based intumescent coating for plasterboard.

      Ref                     Volume

      EP/CP/1            1 litre

      EP/CP/2.5         2.5 litres

      EP/CP/5            5 litres

      EP/CP/20          20 litres


      HW ARC Top coat

      A water-based acrylic emulsion for application over EP/CP intumescent coating.

      All of our 'in stock' product orders will be shipped same day, as long as the order has been processed before 3pm - this is simply to be in a position to catch the courier pickups.

      Some of couriers are explicit in their non-liquid deliveries so if you have ordered a mixture of ambient and liquid products your order has to be split across two couriers. These are lead by courier company policies, however the courier selection was done of price and so you can be safe in the knowledge that you will be getting the most competitive delivery prices around. 

      We deliver across the Island of Ireland and aim for 48/72hrs deliveries on all our orders. If you order a product that is 'out of stock' we will get them shipped by our supplier, Envirograf UK over night for our next days deliveries.