CLEAR INTUMESCENT PAINT AND VARNISHES FOR WOOD (HW SYSTEM)
Rated 3.5/5 based on 11 customer reviews

CLEAR INTUMESCENT PAINT AND VARNISHES FOR WOOD (HW SYSTEM)

Available: In Stock
€19,88
Image

Intumescent Paint for Wood

A range of clear intumescent fire-resistant paint for wood. Giving fire protection to various wood and wood-derived materials. It is ideal for painting or upgrading existing wood or timber surfaces to either 30 or 60 minutes of fire protection. The paint is especially suitable for use on insulation board, MDF board, plasterboard, wood and some wood-derived products. There is no need to strip off the existing paint or varnish as Envirograf adhesion primer is also available. See our references tab for full details on the products in this range. Paint application can be carried our using a brush, roller, or sprayer. In addition, this range provides UV protection for external timber surfaces.

All types of new and old doors, some over 200 years old have undergone testing. All tested in accordance with BS476 Part 22 (1987) and their fire resistance was upgraded to an integrity of over 60 minutes. The HW range can also upgrade wood panelling to 30 minutes or 60 minutes fire rating, according to the type of wood and its thickness. Open joists and floorboards have achieved 60 minutes of fire protection on a leaded floor to BS 476 Part 20 (1987). Timber mouldings and carcasses have achieved 90 minutes of fire rating to BS476 Part 20 (1987). A range of timber types, including s

We provide a vast range of fireproof coatings, intumescent paint, wallpaper, and sprays compatible with a variety of materials. Find more information on Fireproof Coatings here.

A lasting solution for internal and external treated and untreated wood
Can be used on insulation board, MDF board, plasterboard, timber and a wide variety of wood-derived products, including doors, flooring and furniture
Perfect for upgrading existing wooden doors to 30 or 60 minute fire doors - no need to replace them!
With the use of our primer, coatings can be applied on painted or varnished surfaces with no need to strip them before hand
Provides UV protection for external timber surfaces.

Due to our timber coatings needing to be applied to a specific standard into to achieve the appropriate specified fire rating, please contact us for guidance on application, as well as the Application data sheet which will take you through the application process for achieving the specified fire rating you require.

Clear System

HWAP/WB Primer

A water-based product to apply over existing paint, varnish or wax surfaces, before applying other coatings. For internal use.

1 litre
2.5 litre
5 litre

HW02N Clear intumescent coating

Water-based clear intumescent coating for all wood/related products. Tested to BS476 Parts 6 and 7 (1987) (Class 0 and Class 1), EN13501 (Classification A1-B/S1/d0) plus BS476 Part 22 (1987) and EN1364-1 for 30/60 minutes integrity/insulation/stability, dependent on wood thickness. This product requires a top coat.

1 litre
2.5 litre
5 litre
10 litre
20 litre

HW05 Cleat Solvent-Based Hard-Wearing Top coat for use over HW02N

This is a specifically formulated clear coating fir the use on timber floors, walls, doors, bar tops, etc., where they are liable to knocks or damage. For internal use only. Applications by brush or spray.
Gloss(90% sheen),Matt (10% sheen) and Satin (30% sheen)

1 litre
2.5 litre
5 litre

ENS/HS High-density clear lacquer for use over HW02N, ES/VFR, or QVFR.
Finish: Matt/Satin/Gloss.

1 litre

HW ENVIRO CLEAR Top coat

A water-based product to apply over HW01, HW02E, and Product 92 range.
Finish:Matt/Satin/Gloss. For internal use.

1 litre
2.5 litre
5 litre
10 litre

HW EXCEL CLEAR Top coat

A solvent based product to apply over HW02E - no need for an undercoat.
Finish:Matt/Satin/Gloss. For internal use.

<

1 litre
2.5 litre
5 litre
10 litre

HW ULTIMATE CLEAR Top coat

A hard-wearing water based product to apply over HW02E - no need for an undercoat. Ideal fir use on doors or floors.
Finish:Matt/Satin/Gloss. For internal use.

1 litre
2.5 litre
5 litre

HW SUPERB CLEAR Top coat

A solvent based product with basic UV protection to apply over HW02E - no need for an undercoat.
Finish:Matt/Satin/Gloss. For external use.

1 litre
2.5 litre
5 litre
10 litre
for extra UV protection above the standard level, write ?extra UV protection? on your order.

HW TRANSLUCENT Top coat

A satin solvent based wood stain to apply over HW02E for internal & external use

1 litre
2.5 litre
5 litre

HW/CRC Top coat

A chlorinated rubber top coat, for use over HW01F (white) or HW02E (clear). Finish: Satin, for use over HW02E, 2 coats must be applied at 8-10m? per litre, per coat.

1 litre
2.5 litre
5 litre
10 litre

HW/PS Paint Stripper

Where existing paint to varnish needs to be removed before applying Envirograf? Fire Protection. Easy use - wash off with water.

1 litre
2.5 litre
5 litre

HW/C Cleaner & Degreaser

A cleaning liquid to gently remove grease, wax, cigarette stains, etc., before applying Envirograf? Fire Protection. Can be diluted with 20% water (if required).

1 litre
2.5 litre
5 litre

All of our 'in stock' product orders will be shipped same day, as long as the order has been processed before 3pm - this is simply to be in a position to catch the courier pickups.

Some of couriers are explicit in their non-liquid deliveries so if you have ordered a mixture of ambient and liquid products your order has to be split across two couriers. These are lead by courier company policies, however the courier selection was done of price and so you can be safe in the knowledge that you will be getting the most competitive delivery prices around. 

We deliver across the Island of Ireland and aim for 48/72hrs deliveries on all our orders. If you order a product that is 'out of stock' we will get them shipped by our supplier, Envirograf UK over night for our next days deliveries.