Replacement hardwood door edging
Rated 3.5/5 based on 11 customer reviews

Replacement hardwood door edging

Available: In Stock
  • Product SKU: Product 70-edging- 0
  • Category: Fire Doors
£59.16
Image

    This replacement door edging is supplied to fit doors with a thickness between 40mm and 56mm, and itis supplied in 2100mm lengths. It is a complete door edging with concealed intumescent and smoke seal, supplied in a range of thicknesses to fit varying gap sizes.

    – Foor use with door gaps of 3mm, 5mm, and 7mm
    – Can be used in conjunction with brush seals for larger gaps
    – Edging is supplied in a sapele finish as standard, but other finishes are available
    – Ideal for use in heavy-traffic areas where door edging is prone to damage, such as hospital corridors or hotel lobbies

    Remove the existing door edge with a sharp knife, chisel or saw, then rub down the edge with glass paper. If necessary (depending on the gap between door and frame), some planing may be required to allow for the replacement door edge. Replacement door edge fits flush one side (other side is wider to allow for planing down). Apply supplied glue to prepared door edge. Remove backing paper from self-adhesive strip on back of the replacement door edge. Press firmly into position. Hold the door edge firmly in place with masking tape while the glue sets (about 10-20 minutes). Finally, remove the masking tape and smooth down the projecting edge with a suitable plane and/or glass paper.


    ES46E                                   46mm x 7mm                      2100mm smoke seal 5mm

    For doors between 50mm and 56mm thick

    ES56E                                  56mm x 7mm                      2100mm smoke seal 5mm

    When ordering state length of brush required, 5mm, 7mm or 10mm.

    TECHNICAL DATA

    TD070-09-2014.pdf

    APPLICATION DATA

    AP070-09-2014.pdf

    COSHH DATA

    HS070-01-2016.pdf

     

    All of our 'in stock' product orders will be shipped same day, as long as the order has been processed before 3pm - this is simply to be in a position to catch the courier pickups.

    Some of couriers are explicit in their non-liquid deliveries so if you have ordered a mixture of ambient and liquid products your order has to be split across two couriers. These are lead by courier company policies, however the courier selection was done of price and so you can be safe in the knowledge that you will be getting the most competitive delivery prices around. 

    We deliver across the Island of Ireland and aim for 48/72hrs deliveries on all our orders. If you order a product that is 'out of stock' we will get them shipped by our supplier, Envirograf UK over night for our next days deliveries.