Intumescent Coated, Non-Fibrous Slabs
Rated 3.5/5 based on 11 customer reviews

Intumescent Coated, Non-Fibrous Slabs

Available: In Stock

    A high density, fire resistant sponge with a black or white intumescent coating on both main faces. These slabs are suitable for use as a permanent fire barrier in walls, floors and ceilings, or around services.

    – Due to its high density, it can be used for large openings in floors, walls and ceilings

    – Non-fibrous material is ideal for use in sterile areas or clean rooms

    – Ideal for use under raised flooring as a firebreak, providing 1-4 hours fire protection

    Envirograf NF Slab is cut to suit the opening size and you cut around any services
    like a jigsaw, adhering each section or joint with the jointing compound.
    Where services are PVC, i.e. Pipes and cables, Envirograf Wraps should be used,
    50mm wraps for two hour fire protection and 100mm wide wraps for four hour
    protection. The wraps can also be fitted around steel, copper and aluminium pipes to
    stop the pipes overheating and passing the heat from one side to the other of the fire
    When fitting NF Slabs in a floor opening and the mesh is being used to help supports
    the slabs, the wire mesh should be laid into the opening, bending up the sides and
    fixed with screws, raw-plugs and large washers, or split nailing with large washers.
    Then lay the slab on top of the mesh adhering all the sides with jointing compound
    and all cut joints. The whole barrier will dry hard in 10 minutes.
    Where cable trays pass through the barrier so Envirograf Intumescent E1/20/30
    should be fitted over cables.

    REF                        THICKNESS         SLAB SIZE                            PROTECTION                                                                  

    NF50/5                   50mm                     500mm x 1000mm           2 hours                  White Coated

    NF50/7                   50mm                     750mm x 1000mm           2 hours                  White Coated

    NF50/10                 50mm                   1000mm x 1000mm           2 hours                  White Coated

    BNF50/5                50mm                     500mm x 1000mm           2 hours                  Black Coated

    BNF50/7                50mm                     750mm x 1000mm           2 hours                  Black Coated

    BNF50/10              50mm                    1000mm x 1000mm          2 hours                  Black Coated


    * Jointing compound supplied







    All of our 'in stock' product orders will be shipped same day, as long as the order has been processed before 3pm - this is simply to be in a position to catch the courier pickups.

    Some of couriers are explicit in their non-liquid deliveries so if you have ordered a mixture of ambient and liquid products your order has to be split across two couriers. These are lead by courier company policies, however the courier selection was done of price and so you can be safe in the knowledge that you will be getting the most competitive delivery prices around. 

    We deliver across the Island of Ireland and aim for 48/72hrs deliveries on all our orders. If you order a product that is 'out of stock' we will get them shipped by our supplier, Envirograf UK over night for our next days deliveries.